|
|
|
Huge Selection of Motorcycle Flags and Professional Factory Appearance Mounting Options
Our Biker Flags and Motorcycle Mounting Kits are designed specifically for motorcycles. The Mounting Kits provide a clean, quality, factory installed look. Engineered to meet the unique requirements of any bike from cruiser through full dresser with or without luggage racks. Our easily installed mounting systems are built to withstand highway speeds. FLAGS Here's our "Stock" Flags, mix and match anyway you desire! Click on any of them for a larger picture!
Second, All of our 6” x 9” flags are two-ply with Heavy-duty bindings and double-stitched corners.
Third, when you purchase one of our flag kits, you will never have to buy another flag again! We offer lifetime replacement of your flags when purchased with any of our mounting kits! Choice of Four Different Mounting Kits Buy the kit you need to mount your Flags Specifically For YOUR Bike!
Mounting Kit #1 This is our biggest seller. It's our Ultra Mount License Plate Bracket system that bolts onto the left, or right of your license plate. If you want dual flags you'll need two Ultra License Plate Brackets, one for the left side, one for the right side. The Ultra Mount brackets are powder coated black.
This mounting kit consists of another part. First, the Ultra Mount License Plate Bracket I just described and then you use either our 22 Degree or our 45 degree TCM Flag Mount dependant upon if you have a Laydown (45 Degree) or Standard License Plate (22 Degree). The 22 Degree and the 45 Degree TCM Flag Mounts are available in Black or Chrome!
Mounting Kit #2 As you probably noticed, the kits above will work on just about any motorcyle except.....A Full Dresser! See, a Dresser has a tour pack and the license plate is tucked pretty tightly under the tour pack which doesn't leave much clearance for a flag. Not to worry, we have that handled perfectly! All you need to professionally "flag out" a dresser is the TCM Flag Mount (TCM stands for Tour Class Mount) that we use in the kit above!
The TCM Flag Mounts are available in 45 degree or 22 degree and in black or chrome! The TCM Flag Mounts stick on with 3M VHB tape that's included and installed underneath the TCM base! This 3M tape won't damage your paint, it's very strong and will hold, but...you can easily remove it if you want! All you need is some fishing line or dental floss, use it to separate the tape from the TCM base, use a little WD-40 to get any remaining tape that sticks to your bike and you're done. This lets you move your flag mount if you want, of course you'll need a new piece of 3M VHB tape to remount. Yes, it's simple, literally takes minutes to install and it works effectively! Here, Look at these pictures below:
In addition, the TCM Mounts can be installed on the back slope of saddlebags too! Yes, I Know, it's a little confusing so let's recap! Mounting Style #1 is the Ultra License Plate Mount (black powder coated) with the TCM Flag Mount in Chrome or Black. Here's the picture below! Mount Style #2 is just the TCM Flag Mount in Chrome or Black
Mounting Style #3 is the Heavy-Duty Twisted Bar for standard or laydown plates picture below.
Mounting Style #4 is the Fold Down Bar Mount for Tour Pack Luggare Racks! Don't Forget, Lifetime Flag Replacement With Purchase of the Mounting System! GOT IT? Well, here's one last thing! Of course the Bullet Toppers are available in either black or chrome! However, YOU ARE GETTING CHROME UNLESS YOU SPECIFY YOU WANT BLACK. We're Bikers, not IT Guys. You can't believe how hard the HTML code writing is for this freakin' many options. So, you're getting chrome unless you tell us you want black on the order page, don't worry, there's a place to send us a note if you want black.
O.K. we're done now, time to order your Flags and Mounting Kits! Cruiser Class & Touring Class Mounting Kits & Flags
Single Flag Single Ultra Flag Dual Ultra Flag With CCM Mount With Single Ultra Mount With Dual Ultra Mounts $34.95 $39.95 $74.95 Fold Down Bar Mount TCM Stick Mount $54.95 each $34.95 Each
|
|
FDBM Flag Kit Single (Fold-Down Bar Mounting System) |
|
|
Fold-Down Bar Mounting System is designed to mount on 3/8” to 1/2” luggage racks, rails and bars. This mount can be installed on touring or cruiser class motorcycles, featuring a unique base that allows for multiple fold-down angles.
|
|
|
|
|
Send mail to harleybiker@mindspring.com with
questions or comments about this web site.
|
